DGA 6-jaw chuck
Chuck for fast clamping made on Aluminium
6-jaw chuck for use in measuring technology
Key advantages
• Modular and flexible system for different components (circular and cubic)
• Jaws with positioning holes for clamping pins
• Perfect availability with star probe or swivel measuring head
• Size Ø125mm and Ø160mm are with fitting bolt for perfect positioning and no rotation
• Chuck for fast clamping made on Aluminium with a surface protection Altef® coating (48-50HrC)
• Through-hole in the center
In Detail
1. Jaws with rastering for position pins or height positioning
2. Optional deliverable with pin-set (27 pieces)
3. Chuck alignment at the chuck body (concentricity and lateral runout)
4. Clamping different components quickly and easy inside and outside
Concentricity 0,03mm
Repetitive accuracy 0,01mm
Lateral runout 0,01mm
Application
Measuring technology
Laser Marking
Sizes (mm)
125, 160, 240, 320, 400
Aluminium chuck with pin jaws
Concentricity 0,03mm / Repetitive accuracy 0,01mm / Lateral runout 0,01mm
Chuck 6 DGA complete
Size
125
160
240
Article
DGA.125.102
DGA.160.102
DGA.240.102
Price / EUR
1 345 €
1 845 €
3 845 €
Chuck with 1-set clamping jaws for position pins and 1-set clamping and stop pins, clamping wrench, hexagon screwdriver, 3-piece fitting screws (rustproof), 3-piece cylinder head bolts (rustproof)
Chuck 6 DGA basic plus
Size
125
160
240
Article
DGA.125.101
DGA.160.101
DGA.240.101
Price / EUR
1 145 €
1 645 €
3 645 €
Chuck with 1-set clamping jaws and position holes, wrench, hexagon screwdriver, 3-piece cylinder head screws (rustproof)
Jaw-Set 6 DGA basic
Size
125
160
240
Article
DGA.125.013
DGA.160.013
DGA.240.013
Price / EUR
695 €
995 €
1 295 €
Aluminum jaw set, altefiert® and position holes for pins
Pencil set DGA
Size
125
160
240
Article
DGA.125.041
DGA.160.041
DGA.240.041
Price / EUR
795 €
895 €
995 €
Base, clamping and stop pins
|
Price advantage / Discount |
|
|
Quantity (piece) |
Your advantage |
|
1 |
0% |
|
2 |
10% |
|
5 |
20% |
Special versions can be produced very individually and in many variants.
More Information
All the chuck of the DGA line are made by highly firm aluminium. Due to the very hard ALTEF®-Coating the chuck are extremely resistant to abrasion, corrosion and scratching. DGA lines are smooth-running and continuously adjustable.
DGA is available with 3- or 6-jaws and can be delivered in wide diameters (up to 800mm).
