DGA 3-jaw chuck
Precision aluminium chuck – Light construction
For application in the measuring technique

Key advantages
• Proposal for the Measuring technology e.g. gear measuring
• Jaws are vacuum hardened / ground
• Size Ø125mm and Ø160mm are with fitting bolt for perfect positioning and no rotation
• Chuck for fast clamping made on Aluminium with a surface protection Altef® coating (48-50HrC)
• Through-hole in the center
In Detail
1. Jaws are reversible (inside and outside clamping) and vacuum hardened / ground
2. Chuck alignment at the chuck body (concentricity and lateral runout)
3. Top Jaws are fasten by two screws
4. Chuck are fasten by three screws
5. Optional deliverable with different adaption e.g. for gear metrologyDGA3-jaw chuckfor fast clamping made on aluminum3-jaw chuck for application in the measuring technique
Concentricity 0,03mm
Repetitive accuracy 0,01mm
Lateral runout 0,01mm
Application
Measuring technology
Automation
Laser Marking
Sizes (mm)
125, 160, 240, 320, 400
Sizes (mm)/Weight [kg]
125/1,6
160/2,9
240/9
Aluminium chuck with centered drilling
Concentricity 0,03mm / Repetitive accuracy 0,01mm / Lateral runout 0,01mm
Size
160
240
320
400
Article
DGA.160.002
DGA.240.002
DGA.320.002
DGA.400.002
Price / EUR
2 475 €
2 975 €
7 975 €
8 975 €
Chucks with 1 set of basic and reversible top jaws for internal and external clamping, clamping wrench, hexagon screwdriver, 3-piece cylinder head bolts (stainless steel)
Size
160
240
320
400
Article
DGA.160.001
DGA.240.001
DGA.320.001
DGA.400.001
Price / EUR
2 175 €
2 575 €
7 475 €
8 375 €
Chuck with 1-set base jaws without top jaws, wrench, hexagon screwdriver, 3-piece cylinder head screws (rustproof)
Size
160
240
320
400
Article
DGA.160.113
DGA.240.113
DGA.320.113
DGA.400.113
Price / EUR
675 €
975 €
1 475 €
1 875 €
Basic jaw set made of aluminum, altefiert®
Size
160
240
320
400
Article
DGA.160.114
DGA.240.114
DGA.320.114
DGA.400.114
Price / EUR
775 €
1 075 €
1 575 €
1 975 €
Reversible top jaws for internal and external clamping (vacuum-hardened / ground)
Price advantage / Discount |
|
Quantity (piece) |
Your advantage |
1 |
0% |
2 |
10% |
5 |
20% |
Special versions can be produced very individually and in many variants.
More Information
All the chuck of the DGA line are made by highly firm aluminium. Due to the very hard ALTEF®-Coating the chuck are extremely resistant to abrasion, corrosion and scratching.
DGA lines are smooth-running and continuously adjustable.
DGA is available with 3- or 6-jaws and can be delivered in wide diameters (up to 800mm).